Chemineral — Petrochemicals from Oman
Chemineral
All Insights
Logistics13 min read15 Nov 2026

Gross, Net, Tare and VGM: Getting Cargo Weights Right From Factory to Invoice

What gross, net and tare weight mean, which one you are invoiced on, how weight is measured for bags, drums, containers and bulk, what the verified gross mass rule requires, and how to handle weight differences.

By Chemineral Trade Desk
Container truck on a weighbridge at a port gate

Weight looks like the least controversial fact about a cargo. A tonne is a tonne. Yet weight is one of the most frequent causes of document rejections, customs queries, overloaded containers, short-delivery claims and arguments about who owes whom. The reason is that a shipment has several weights, measured by different people with different equipment at different times, and each document may quote a different one.

This guide explains the weights you will meet, which one determines what you pay, how weight is measured for packaged and bulk cargo, what the verified gross mass rule for containers requires, and how to deal with differences. It is general guidance. The method that governs your shipment is the one written in your contract, and the legal requirements are those of the countries and carriers involved. For bulk cargo measurement by ship's draft, see our draft survey guide, and for packing containers, see container shipping for polymers.

The basic terms

Answer first: net weight is the product alone. Tare is the packaging. Gross weight is the two together. Most commodity sales are priced on net weight, and most transport and safety rules work on gross weight.

  • Net weight. The weight of the product without any packaging.
  • Tare weight. The weight of the packaging: bag, liner, drum, pallet, wrap and so on. For a container, tare is the weight of the empty box, shown on its door.
  • Gross weight. Net plus tare. For a pallet, it is product plus bags plus pallet plus wrap. For a container, it is everything inside plus the container itself.
  • Payload. The maximum weight of cargo a container or vehicle may carry.
  • Maximum gross weight. The most a loaded container may weigh, also shown on the door, and often lower in practice because of road limits.

There are layers. A 25 kg bag of resin has a net weight of 25 kg and a small tare for the bag. A pallet of forty bags has a net weight of 1,000 kg and a gross weight that adds the bags, pallet and wrap. A container of twenty pallets has its own gross weight including the box. Each layer has a net, a tare and a gross, and documents need to be clear about which layer they describe.

Other terms you may see

  • Metric tonne. 1,000 kg. Check that "ton" in a document does not mean a short or long ton, which are different.
  • Dry weight and wet weight. Weight without or with moisture, important for products priced on a dry basis.
  • Chargeable weight. A freight term for air and some other modes, based on weight or volume.
  • Dead weight and displacement. Ship terms used in draft surveys and vessel descriptions.
Reach stacker lifting a container at a terminal
Reach stacker lifting a container at a terminal

Which weight do you pay for?

Answer first: it depends on the contract. Most bulk and bagged commodities are sold on net weight, determined at a named place by a named method. Write both down.

Decide these points in the contract:

  1. Basis. Net weight is normal. Some trades sell "gross for net", meaning the packaging is paid for as if it were product. Avoid that unless you intend it.
  2. Where weight is final. At loading (shipped weight) or at discharge (landed or delivered weight). Many contracts make loading weight final.
  3. Method. Weighbridge, bag count multiplied by a stated bag weight, draft survey, flow meter or tank measurement.
  4. Who determines it. The seller, the terminal or an independent surveyor.
  5. Tolerance. How far the shipped quantity may differ from the contract quantity, and whether a small loss in transit is accepted without claim.
  6. Moisture basis, if relevant.

See our guides to key clauses in a sale contract and commodity price formulas for how quantity feeds into price and settlement.

How weight is measured

Bags

Bagged goods are usually weighed at the filling machine. Each bag is filled to a target net weight, and the total is the bag count multiplied by the nominal bag weight, sometimes confirmed by weighing a sample of bags or a weighbridge check on the truck.

Points to check:

  • Nominal versus actual. A bag marked 25 kg net will not weigh exactly 25 kg. Filling machines have a tolerance, and legal metrology rules in many countries set permitted deviations for pre-packed goods. Agree what tolerance applies.
  • Average weight. Contracts often accept that the average of a sample must meet the nominal weight, with limits on individual bags.
  • Bag tare. The empty bag has weight. Net weight excludes it.
  • Moisture. Hygroscopic products gain weight in humid air, and lose it when they dry.
  • Count. The number of bags loaded should be tallied and recorded.

Drums and IBCs

Drums are filled by weight or volume. Record the net weight per drum, the tare of the drum and the gross. For liquids filled by volume, the weight depends on density at the filling temperature, so the temperature and density used should be stated. See our guides to bitumen packaging and base oil specifications.

Trucks and weighbridges

A weighbridge weighs a vehicle full and empty. The difference is the load. Accuracy depends on calibration, on weighing the same vehicle configuration both times and on details such as fuel level and whether the driver is on board. Ask for weighbridge tickets with date, time, vehicle number and both weights, and check that the weighbridge is certified.

Bulk solids on vessels

Bulk cargo is commonly measured by draft survey, which calculates the weight loaded from the change in the ship's displacement, or by shore scales such as belt weighers. The two rarely agree exactly. The contract should say which is final. Our draft survey guide explains the method and its accuracy.

Bulk liquids

Liquids are measured by tank gauging on shore or on the vessel, or by flow meters, with volume converted to weight using density and temperature corrections. Shore figures and ship figures differ, and contracts normally name one as final.

Verified gross mass for containers

Answer first: before a packed container is loaded onto a ship, the shipper must give the carrier and terminal its verified gross mass. Without it, the container should not be loaded.

What the rule is

The requirement comes from the international convention on safety of life at sea, and it has applied to packed containers since 2016. It exists because mis-declared container weights have contributed to stack collapses, vessel stability problems and accidents on the road and in terminals. The detailed implementation, including permitted tolerances and enforcement, is set by each country, so check the rules where you load.

Two permitted methods

  1. Weigh the packed container. After packing and sealing, the whole container is weighed on calibrated, certified equipment. If it is weighed on a truck, the weight of the truck, chassis and fuel is deducted.
  2. Calculate it. Weigh all the cargo items, including packaging, pallets, dunnage and securing material, and add the tare weight of the container shown on its door. This method normally needs approval or certification from the authority in the country of packing, and it is not suitable for some cargo such as loose bulk in a container.

Estimating is not allowed. Nor is using the weight declared by someone else without verifying it, except where the rules specifically allow sealed packages marked with an accurate weight to be used.

Who is responsible

The shipper named on the bill of lading is responsible for obtaining and declaring the verified gross mass, even if a forwarder or packer does the weighing. The declaration is signed by a person authorised by the shipper, and is sent in a shipping document or electronically, before the carrier's cut-off.

What goes wrong

  • Missed cut-off. No declaration, no loading. The container is rolled to a later vessel and storage charges start. See our guide to container demurrage and detention.
  • Mismatch. A declared figure that differs noticeably from a terminal's check weight can lead to holds, re-weighing fees or penalties.
  • Forgetting materials. Pallets, wrap, dunnage and lashing add up. See our guide to pallets and wood packaging.
  • Wrong tare. Using a generic container tare in place of the figure on the door.
  • Overweight. A correct declaration of a container that exceeds its maximum gross weight or a road limit still cannot move.

Why buyers should care

Under FOB, CFR and CIF, declaring the verified gross mass is the seller's task as shipper. But a rolled container delays the buyer's cargo and can breach the letter of credit's latest shipment date. Ask your supplier how they produce the figure, and compare it with the packing list.

Automatic bagging line filling 25 kg bags
Automatic bagging line filling 25 kg bags

Container weight limits

Answer first: three limits apply, and the lowest one governs: the container's own rating, the carrier's limit and the road or rail limit at both ends.

  • Container rating. The maximum gross weight and payload shown on the door.
  • Carrier and vessel limits. Lines may set lower limits, or charge for heavy containers.
  • Road and rail limits. Axle and total weight limits in the origin and destination countries are often the tightest. A container that is legal at sea may be illegal on the road to your warehouse.
  • Handling equipment. The destination terminal, depot and your own forklifts must be able to lift it.
  • Weight distribution. Load should be spread evenly, with the centre of gravity near the middle and low.

For dense products such as mineral powders, bagged fertiliser or drummed liquids, the container reaches its weight limit long before it is full. Ask for a loading plan with the calculated gross weight and check it against the road limit at destination before you confirm the quantity per container.

Weight on the documents

Answer first: the same weight should appear consistently across documents, with the same unit and the same basis. Inconsistencies are a classic letter of credit discrepancy.

Check each document:

  • Commercial invoice. Net weight, which the price is multiplied by.
  • Packing list. Number and type of packages, net and gross weight per package and in total.
  • Bill of lading. Usually gross weight, and number of packages, as declared by the shipper.
  • Certificate of weight or weight list, if required, from the seller or an inspector.
  • Certificate of origin and customs declarations. Net or gross, as the form requires.
  • Insurance certificate. Quantity consistent with the invoice.
  • Verified gross mass declaration. Gross mass of the packed container.

The figures do not all have to be the same number, because they describe different things, but they must be consistent with one another. Net on the invoice plus stated tare should equal gross on the packing list, and so on. See our guides to export shipping documents, bills of lading and letters of credit. Customs also uses weight, and where duty is charged per unit of weight a wrong figure changes the duty. See landed cost and customs valuation.

Why loading and arrival weights differ

Some difference is normal. Causes include:

  • Different equipment with different accuracy and calibration.
  • Different methods, such as draft survey at loading and weighbridge at discharge.
  • Moisture change in transit, gained or lost.
  • Handling loss. Spillage, residue in holds, hoppers, tanks and pipelines, and torn bags.
  • Temperature and density effects for liquids.
  • Clerical errors, such as wrong tare, transposed digits or the wrong unit.
  • Theft or pilferage.
  • Evaporation of volatile products.

Contracts usually deal with this by naming one weight as final, and sometimes by allowing a small franchise, a percentage difference below which no claim is made. Agree both.

Handling a weight dispute

  1. Check the contract. Which weight is final, by which method and who determines it?
  2. Compare like with like. Net with net, the same unit, the same moisture basis.
  3. Review the evidence. Weighbridge tickets, tally sheets, survey reports, seal records and photographs.
  4. Check calibration certificates for the scales used.
  5. Look for a pattern. A consistent shortfall of the same size suggests a tare or method problem. A single large loss suggests an incident.
  6. Check seals and packaging. Broken seals or torn bags point to loss in transit, which may be an insurance or carrier matter.
  7. Notify promptly under the contract's claims clause, and involve the insurer or carrier if their liability is in question.
  8. Use a joint survey where the amount justifies it.

Our guides to quality claims and disputes and marine cargo insurance set out how claims are made, and choosing an independent inspector explains how to appoint a surveyor. Chemineral can arrange SGS or Intertek pre-shipment inspection, which can include weighing or tallying if you ask for it in the scope.

What to put in the contract and the order

  1. Price basis: net weight, in metric tonnes.
  2. Place and method of final weight determination.
  3. Who performs it, and who pays.
  4. Quantity tolerance and any transit franchise.
  5. Bag or drum net weight, tolerance and average rule.
  6. Moisture basis, if applicable.
  7. Maximum gross weight per container, allowing for road limits at destination.
  8. Requirement for a loading plan and packing list with net, tare and gross.
  9. Verified gross mass to be provided on time and copied to the buyer.
  10. Documents to show consistent weights and units.

Common mistakes

  • Not stating whether price is on net or gross weight.
  • No agreed place or method for final weight.
  • Confusing tonnes with other kinds of ton.
  • Leaving out pallets and dunnage from gross weight.
  • Using a generic container tare.
  • Loading to the container's rating and exceeding the road limit.
  • Inconsistent weights across documents.
  • Late verified gross mass, so the container misses the vessel.
  • Comparing weights taken on different moisture bases.
  • Paying a claim without checking calibration and method.

Frequently asked questions

What is the difference between gross and net weight?

Net weight is the product alone. Gross weight is the product plus its packaging, and for a container it includes the container. Most commodities are priced on net weight.

What is verified gross mass?

It is the confirmed total weight of a packed container, including cargo, packaging, securing materials and the container's tare. The shipper must declare it before the container is loaded on a ship.

Who is responsible for the verified gross mass?

The shipper named on the bill of lading, even when a forwarder or packer does the weighing. Under FOB, CFR and CIF that is normally the seller.

Why is my arrival weight lower than the bill of lading weight?

Possible reasons include different equipment or methods, moisture loss, handling loss, a tare error or the bill showing gross weight while you measured net. Check the contract to see which weight is final.

How much can I load in a container?

The lowest of the container's payload, the carrier's limit and the road or rail limit at origin and destination. For dense cargo, the road limit often decides.

Next step

If you want a loading plan with net, tare and gross weights for your shipment, send the trade desk your product, packing, quantity and destination through the contact page. We quote Suez and Cape routing side by side for shipments from Sohar and Salalah, and firm offers are valid for 72 hours.

WeightsVGMContainersShipping DocumentsLogisticsGuide
Trade with us
Act on this analysis.

Our trade desk can turn the views in this report into firm offers on today's indicative prices — valid 72 hours, with complete documentation.

Request a quote
Chat with our trade desk